Everything Totally Explained


Ask & we'll explain, totally!
Stoppie
Totally Explained


  NEW! All the latest news in the worlds of computer gaming, entertainment, the environment,  
finance, health, politics, science, stocks & shares, technology and much, much, more.  


View this entry using RSS

Everything about The Stoppie totally explained

The stoppie, also known as the endo, is a motorcycle and bicycle trick in which the back wheel is lifted and the bike is ridden on the front wheel. It is also sometimes called a front wheelie or wikang (wheelie belakang) in Malaysia.

General description

The trick is performed by progressively engaging the front brake and leaning forward. The rider then tries to balance by shifting their weight and keeping the rear wheel as high as possible. If the bicycle rider doesn't have a front brake, then experienced riders may jam a foot in between the tire and front fork while pushing forward. Endos can also be accomplished without front brakes with the aid of a roadside curb. NB: If the bike's wheels are 24" or larger that'll normally mount the curb instead of being stopped by it.
   The term endo can also refer to a crash caused by improperly landing with the front wheel first after a jump. With the rear wheel high enough in the air upon landing, a moving bicycle has the tendency to throw the rider over the handlebars and flip end over end (hence the name endo).

How it's done

To perform a stoppie, the rider gets up to speed and applies the front brake while leaning forward, then rides on the front wheel until the bike stops. The trick is straightforward in theory but difficult to perform. A front wheel skid due to excessive braking on unstable ground (such as dirt or gravel) or letting the back wheel rise too high will cause a crash which can result in the bicycle or motorcycle landing on the rider. Front brake control during the stoppie is essential. On a bicycle it's also easier for the back wheel to rise if the rider lifts it up with the help of the feet and the pedals. To do this put the feet on the pedals and point the toes to the ground while putting force towards the pedals, then, as the front brake is pressed, lift up the pedals.
   The secret is to ride at about 10 mph and apply the brake smoothly. The rider should find an open car park or a dirt field. The front brake is applied slowly at first and then more progressively, until the front end is fully loaded. On practice runs the rider lets go of the front brake before the bike stops completely in order to get used to keeping balance after the release of the front brake.
   Loading the front forks is important, because it transfers the forces from the bike's weight onto the front before the rear is brought up. A stoppie isn't achieved by instantly applying full front brake. That will just slide the front (even at 10 mph).
   The force needs to be transferred because without the bike's full weight on the front tire, the braking force will be greater than the tire's stopping power and the bike will start to slide. Stopping power (traction) is proportional to the weight of the tire. When the rear wheel begins to rise, the bike's full weight is on the front tire.
   Keep applying the brakes harder with each pass until the rear end comes up. The rider must be ready to release the front brake as soon as the rear end is as high as comfortable.
   Note: During a long and well balanced stoppie the rider will only be on the front brake 10% or less.
   No rear brake is used, it won't prevent the rider from going over as it does with wheelies. However, tapping the rear brake before the rear wheel is returned to the ground will ensure a smoother landing while reducing wear of the chain, sprocket, and countershaft. If no rear brake is applied and the rear wheel is still spinning a clunking noise is common upon completion of the endo.
   Keep the bike in first gear so that the bike can be accelerated when it comes down to stabilize the bike.
   A stoppie performed well will put the bike in the air for 2-3 (or more) seconds.
   There are more subtle tricks such as standing up on the pegs a little before braking to make the trick last longer.
   Although not completely necessary, on a motorcycle a steering stabilizer is commonly used to prevent tankslappers, where the vehicle becomes out of control and the handlebars slap the tank at high speed from side to side to their full range of motion.
   The stoppie is sometimes performed by squids on public roads which can end in crashes and/or injuries that are worsened by the rider's lack of protective gear. It is illegal to perform stoppies on public roads and protective gear should always be worn.
Further Information

Get more info on 'Stoppie'.


External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

    <a href="http://stoppie.totallyexplained.com">Stoppie Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
   As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.



Copyright © 2007-8 totallyexplained.com | Licensed under the GNU Free Documentation License | Site Map
This article contains text from the Wikipedia article Stoppie (History) and is released under the GFDL | RSS Version